PED 97/23/EC COMPLIANT(800) 576 - 6308 or email
|
PED 97/23/EC COMPLIANT |
(800) 576 - 6308 or email |
 |
The Flange Insert Valve is the ultimate check valve in flanged systems. Designed to be inserted between two mating ANSI flanges, it provides the simplest most economical way to install a check valve into a piping system. The valve body automatically positions the valve and holds it in place while bolts are being installed and tightened. All that is required is two gaskets in place of the one normally used in a flanged joint. Additional Installation Guidelines Available
Materials: |
|
PED 97/23/EC COMPLIANT |
(800) 576 - 6308 or email |
|
The Lined Pipe Insert valve is designed to mate between two flanges on most lined pipe systems. It provides the simplest most economical way to install a check valve in a lined piping system. No gaskets are required, just spread the flanges, center the valve and bolt the flanges together. Lined Pipe Insert valves are available in TEFLON® resin and HASTELLOY® C Alloy to satisfy the most demanding applications. The standard spring material is HASTELLOY® C Alloy. Other materials are available upon request. Available
Materials: |
|
PED 97/23/EC COMPLIANT |
(800) 576 - 6308 or email |
|
|
|
PED 97/23/EC COMPLIANT |
(800) 576 - 6308 or email |
|
The 3-A Sanitary Check Valve is an all 316/316L stainless steel check valve for use in new or existing sanitary systems. The 3SC design seals on the ID of sanitary ferrules with 3-A specified materials (standard is EPDM). The valve seals inside fittings such as Tri-Clover® Bevel Seat and Tri-Clamp®, Waukesha Cherry-Burrell Q-Clamp® and S-Line®, and others with ID dimensions equal to the "F" dimensions listed. The valve is designed to be easily disassembled and spare parts are available. The compact 3SC design fits inside a single set of ferrules, and requires no additional space in the line. The insert design makes it extremely economical when compared to full-bodied valves. The wide variety of seat materials and cracking pressure springs allows this series to be used as a check valve or vacuum breaker. Please specify when ordering. Available
Materials: |
|
PED 97/23/EC COMPLIANT |
(800) 576 - 6308 or email |
|
|
For over 30 years, the compact, TEFLON® resin, Sanitary Insert Valve has been used as the most economical solution to providing a check valve in a new or existing sanitary piping system. This valve style is designed to fit into grooved-end clamp-type fittings. Since the Sanitary Insert Valve replaces the gasket normally used with clamp joints, no extra space is required to accommodate the valve. Two different types of Sanitary Insert Valves are available. They are distinguished by the following designations in their part numbers:
|
Sizes
& Dimensions | Pressure
Temperature Rating
Seat
Materials & Cracking Pressure Options | Flow
Data | Application
Guidelines
Installation
Guidelines | Valve
Weights
|
PED 97/23/EC COMPLIANT |
(800) 576 - 6308 or email |
|
The Union Insert Valve is the threaded pipe counterpart of the Flange Insert Valve. Designed to be inserted into most standard ground joint unions, it provides the simplest and most economical way to install a check valve in a threaded pipe system. A check valve may be installed anywhere in the system where there is a union. The valve works equally well in either a horizontal or vertical position with proper spring selection. Each Union Insert Valve is furnished with a metal tag, which is quickly attached to the union. The tag is attached when the valve is installed and provides a permanent record that the union contains a check valve. Bore of union must be equal to I.D. of schedule 40 pipe. 45 degree ground joint unions only. |
|
| PED
Compliance Statement:
Due to the unique design of
the Union Insert Valve, this series is not considered a pressure vessel
but rather a gasket. According to PED Guideline 1/8, gaskets are
not governed by the Pressure Equipment Directive. As a result, the
UIV series is available for sale in the European Community and no CE
Mark is required.
Available
Materials: |
|
|
PED 97/23/EC COMPLIANT |
(800) 576 - 6308 or email |
|
|
The Straight
Sided Insert is a thread less check valve designed to
be inserted into any cavity where a check valve is needed and threads
are not desired.
Available
Materials: |
|
PED 97/23/EC COMPLIANT |
(800) 576 - 6308 or email |
|
|
The Glass Pipe Insert is an all TEFLON® resin check valve with a TEFLON® resin encapsulated spring. The valve is designed to replace the gasket normally used with glass pipe connecting flanges. It is inserted into one end of the glass pipe and the flange bolts are tightened. No extra pipe fittings are necessary to install a GPI in the line. The valve works equally well in any position with proper spring selection, which facilitates installing a check valve anywhere in the system. |
 Information/Quotations/Assistance |
 |
 |
